1311 Armory Rd  |  Salina, KS  67401

Instructions

Directions Using Screws

• Hold handles to back corner of furnace toward the top.
• Install (6) 3/4 inch #8 sheet metal screws through each handle through holes provided.
• Tilt furnace back and carry.

Directions Using Straps

• Hold the handles at the same location on the furnace as if you are using screws.
• Thread the straps through the handles and attach the ratchet at the back of the furnace.
  
• Ratchet the straps tight enough the handles will not slip off the furnace.
  
• Make sure you do not over tighten.
  
• Lean the furnace back and carry.
  
• When carry a water heater, turn the handles around and place against the water heater and repeat above strap instructions.